Description

What is CRC Rust Remover?

CRC Rust Remover is a concentrated scale and rust remover. Based on acid, it removes rust and cleans metal surfaces from scale, tarnish, oxidation and stains. CRC Rust Remover is a phosphoric acid based concentrate used to remove rust and to clean metal surfaces. It cleans tarnish, oxidation, stains, fingerprints and scale from iron, steel, copper, brass and aluminium.

Features:

•  Excellent wetting capacity on both ferrous and non-ferrous metals.
• Contains an inhibitor to reduce the attack of the metal surface and to prevent the formation
  of hydrogen.
• Economical concentrate.
• Can be diluted with water to any concentration needed (see Directions for detailed
  information).
• Specifications : meets the performance requirements of Mil-C-10578 (type III).
• Carton of 2 – 5L Units.

Applications:

• Rust and scale removal from :
  • ferrous metals
  • non-ferrous metals
• Oxidation and stains removal from :
  • aluminium
  • copper
  • brass
• Metals preparation prior to painting
• Cleaning of :
  • in-process parts and assemblies
  • sheet metal
• Restoration of rusted parts.
• Removal of metal and rust stains from porous materials.

Directions:

• Heavy rust and scale (ferrous metals) : dilute concentrate with 3 parts water. Metal should be immersed 20 minutes to 1 hour. Remove and rinse metal with water and treat immediately with CRC 3-36 for water displacement and corrosion protection.
• Heavy corrosion (non-ferrous) : dilute concentrate with 7 to 10 parts water. Metal should be immersed 20 minutes to 1 hour. Periodically check non-ferrous metals. Remove and rinse with water. Treat immediately with CRC 3-36 for water displacement and corrosion protection.
• As a metal cleaner (ferrous and non-ferrous) : dilute concentrate with 15 to 20 parts water. Metal may be immersed, brushed or wiped until the desired brightness is obtained. Rinse with water and treat immediately with CRC 3-36 for water displacement and corrosion protection.
• Heating (up to 65°C max.), agitation or wiping will speed up cleaning action.
• Quicker results are obtained by prior removal of oil and grease, using CRC Industrial Degreaser or CRC Fast Dry Degreaser.
• CRC Rust Remover is mildly acidic; therefore, reasonable care should be taken. Rubber gloves and protective goggles are recommended.
• Equipment used must be made of acid resisting material such as stainless steel, wood, rubber, plastic, glass or ceramic.
• A safety data sheet according EU directive 93/112 is available for all CRC products. (source)

We supply CRC Rust Remover and other CRC products in bulk and in lose to users in Dubai and other emirates. Fill the Form above to place an inquiry.

Looking for a different CRC Product?

Head on to CRC Products page to view what other products we stock or send us an inquiry on sales@saftechhardware.ae or via Whatsapp.

Precautions for safe handling: Do not pierce or burn CRC Co-Contact Cleaner, even after use. Do not use if spray button is missing or defective. Do not spray on a naked flame or any other incandescent material. Do not smoke while using or until sprayed surface is thoroughly dry. Do not cut, weld, solder, drill, grind, or expose containers to heat, flame, sparks, or other sources of ignition. All equipment used when handling the product must be grounded. Do not re-use empty containers. Do not breathe
mist/vapours. Avoid prolonged exposure. Use only in well-ventilated areas. Wear appropriate personal protective equipment. Avoid release to the environment. Observe good industrial hygiene practices.