Description

What is CRC Cable Clean?

CRC Cable Clean is a heavy duty degreaser with strong cleaning action and fast evaporation. It is a non-flammable electrical parts cleaner. The chlorinated solvent blend is designed to quickly and effectively clean electrical cables, preventing failures and malfunctions caused by contaminants such as dust, dirt, grease and oil.

Features of CRC Cable Clean:

• Contains no ozone depleting chemicals: ODP = 0.
• Gives no contribution to global warming: GWP = 0.
• Promotes operating efficiency.
• Contributes to prolonged equipment life.
• Evaporates quickly and leaves no residue.
• Non-staining, non-corrosive and non-conductive.
• No flash point.
• May be harmful to some plastics, rubbers, adhesives and paints. (Test prior to use.)
• Aerosols are equipped with the 360° (upside-down) spray valve for added convenience.
• With non-flammable CO2 propellant, giving an active product content of 97%.

Applications: 

• Power cables.
• Communication cables.
• Steering cables.
• Cable assemblies. (source)

Directions for use:

• Apply liberally by spraying or dipping and allow excess to run off. Use extension tube for hard-to-reach areas. In dipping bath applications, agitation enhances cleaning action. May also be applied by wiping or by brushing. To clean inside equipment, covers, plates, etc. should be removed prior to product application.
• Allow to air dry or dry with absorbent cloth.
• May attack some plastics, rubbers, adhesives and paints. Do not use on polycarbonate or polystyrene. If in doubt, test on a small area before using or contact the manufacturer of the components to be cleaned.
• Do not use on sensitive electronic equipment such as tape desks, VCR’s, computers, etc. Use one of CRC’s contact cleaner products for this.
• Use only in well ventilated area.

We supply CRC Cable Clean and other CRC products in bulk and in lose to users in Dubai and other emirates. Fill the Form above to place an inquiry.

Looking for a different CRC Product?

Head on to CRC Products page to view what other products we stock or send us an inquiry on sales@saftechhardware.ae or via Whatsapp.

Precautions for safe handling: Do not pierce or burn CRC Co-Contact Cleaner, even after use. Do not use if spray button is missing or defective. Do not spray on a naked flame or any other incandescent material. Do not smoke while using or until sprayed surface is thoroughly dry. Do not cut, weld, solder, drill, grind, or expose containers to heat, flame, sparks, or other sources of ignition. All equipment used when handling the product must be grounded. Do not re-use empty containers. Do not breathe
mist/vapours. Avoid prolonged exposure. Use only in well-ventilated areas. Wear appropriate personal protective equipment. Avoid release to the environment. Observe good industrial hygiene practices.